Pascal (unit): Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>Paul Wormer
m (→‎Practical use: added atm)
imported>Milton Beychok
m (→‎Practical use: Minor rewording of one sentence. Also added a wiki link.)
Line 11: Line 11:
1 atm = 101 325 Pa; see [[pressure]] for a table relating different units.
1 atm = 101 325 Pa; see [[pressure]] for a table relating different units.


==Practical use==
==Practical usexamples==
*Atmospheric pressure at sea level is approximately 101 kPa ≈ 1 atm.
*[[Atmospheric pressure]] at sea level is approximately 101 kPa ≈ 1 atm.
*[[ASTM]] A36 [[steel]] has a yield stress of about 250 MPa.
*[[ASTM]] A36 [[steel]] has a yield stress of about 250 MPa.
*[[Blood pressure]] - conventionally measured in ''mm of Hg'' can be converted to kPa - the ''Conversion Factor'' being 7.52 i.e., 75.2 mm of Hg is equivalent to 10 kPa.
*[[Blood pressure]] is conventionally measured in ''mm of Hg''. Since 1 mmHg is equal to 133.3 Pa, a blood pressure of 75 mmHg is equivalent to 10 kPa.

Revision as of 11:51, 8 July 2011

This article is a stub and thus not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.

The pascal is the SI unit of pressure, and is the force of one newton acting uniformly over an area of one square metre. The symbol of the joule in SI is Pa. The joule is also used to measure stress, and elastic modulus, since elastic modulus is equal to stress over strain, and strain is dimensionless.

The pascal is named for Blaise Pascal (1623 - 1662), who did significant work on fluids, pressure, and vacuum.

The pascal is a derived unit in the SI, equal to 1 N/m2; or in terms of SI basic units:

.

1 atm = 101 325 Pa; see pressure for a table relating different units.

Practical usexamples

  • Atmospheric pressure at sea level is approximately 101 kPa ≈ 1 atm.
  • ASTM A36 steel has a yield stress of about 250 MPa.
  • Blood pressure is conventionally measured in mm of Hg. Since 1 mmHg is equal to 133.3 Pa, a blood pressure of 75 mmHg is equivalent to 10 kPa.