Pascal (unit): Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>Trevor Ebbens
m (spelling)
imported>Milton Beychok
m (Minor copy edit)
Line 1: Line 1:
{{subpages}}
{{subpages}}


The '''pascal''' is the [[International System of Units|SI]] unit of [[pressure]], and is the pressure of one [[newton]] acting uniformly over an area of one square [[metre]]. The symbol of the joule in SI is '''Pa'''. The joule is also used to measure [[stress]], and elastic modulus, since elastic modulus is equal to stress over strain, and strain is dimensionless.
The '''pascal''' is the [[International System of Units|SI]] unit of [[pressure]], and is the force of one [[newton]] acting uniformly over an area of one square [[metre]]. The symbol of the joule in SI is '''Pa'''. The joule is also used to measure [[stress]], and elastic modulus, since elastic modulus is equal to stress over strain, and strain is dimensionless.


The pascal is named for [[Blaise Pascal]] (1623 - 1662), who did significant work on fluids, pressure, and vacuum.
The pascal is named for [[Blaise Pascal]] (1623 - 1662), who did significant work on fluids, pressure, and vacuum.

Revision as of 12:03, 30 April 2008

This article is a stub and thus not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.

The pascal is the SI unit of pressure, and is the force of one newton acting uniformly over an area of one square metre. The symbol of the joule in SI is Pa. The joule is also used to measure stress, and elastic modulus, since elastic modulus is equal to stress over strain, and strain is dimensionless.

The pascal is named for Blaise Pascal (1623 - 1662), who did significant work on fluids, pressure, and vacuum.

The pascal is a derived unit in the SI, equal to 1 N/m2; or in terms of SI basic units:

.

Practical use

  • Atmospheric pressure at sea level is approximately 101 kPa.
  • ASTM A36 steel has a yield stress of about 250 MPa.
  • Blood pressure - conventionally measured in mm of Hg can be converted to kPa - the Conversion Factor being 7.52 i.e., 75.2 mm of Hg is equivalent to 10 kPa.