Magnetic induction: Difference between revisions
imported>Paul Wormer |
imported>Paul Wormer No edit summary |
||
Line 1: | Line 1: | ||
{{subpages}} | {{subpages}} | ||
In [[physics]], and more in particular in the theory of [[electromagnetism]], '''magnetic induction''' | In [[physics]], and more in particular in the theory of [[electromagnetism]], '''magnetic induction''' is commonly denoted by '''B''' and is also known as '''[[magnetic flux]] density'''; it is very closely related to the [[magnetic field]] '''H''' and often identified with it. | ||
The SI unit measuring the strength of '''B''' is T (tesla), and the Gaussian unit is gauss. One tesla is 10 000 gauss. To | The SI unit measuring the strength of '''B''' is T ([[tesla]]), and the Gaussian unit of '''B''' is [[gauss]]. One tesla is 10 000 gauss. | ||
To give an indication of magnitudes: the magnetic field (or better magnetic induction) of the Earth is about 0.5 gauss = 50 μT. A medical MRI diagnostic machine typically supports a field of up to 2 T. The strongest magnets in laboratories are currently about 30 T (300 kG). | |||
==Note on nomenclature== | ==Note on nomenclature== | ||
Most textbooks on electricity and magnetism distinguish the magnetic ''field'' '''H''' from the magnetic ''induction'' '''B''' (both quantities are [[vector fields]]). Yet, in practice physicists and chemists almost always call '''B''' the ''magnetic field''. It is likely that this is because the term "induction" suggests an induced magnetic moment. Because such a moment is usually not present, the term induction is confusing. In science, phrases are common as: "This EPR spectrum was measured at a magnetic field of 3400 gauss", and "Our magnet can achieve magnetic fields as high as 20 tesla". That is, most scientists use the term "field" with units tesla or gauss, while strictly speaking, gauss and tesla are units of the magnetic induction '''B'''. | |||
==Relation between '''B''' and '''H'''== | ==Relation between '''B''' and '''H'''== | ||
In vacuum | In vacuum (also known as the microscopic case), in the absence of a ponderable medium, the fields '''B''' and '''H''' are related as follows, | ||
:<math> | :<math> | ||
\begin{align} | \begin{align} | ||
Line 15: | Line 17: | ||
\end{align} | \end{align} | ||
</math> | </math> | ||
where μ<sub>0</sub> is the [[magnetic constant]] (equal to 4π⋅10<sup>−7</sup> N/A<sup>2</sup>). Note that | where μ<sub>0</sub> is the [[magnetic constant]] (equal to 4π⋅10<sup>−7</sup> N/A<sup>2</sup>). Note that in Gaussian units the dimensions of '''H''' (Oer) and of '''B''' (G = gauss) are equal, 1 Oer = 1 G. | ||
In a continuous magnetizable medium the relation between '''B''' and '''H''' contains the [[magnetization]] '''M''' of the medium, | In the presence of a continuous magnetizable medium (the macroscopic case), the relation between '''B''' and '''H''' contains the [[magnetization]] '''M''' of the medium, | ||
:<math> | :<math> | ||
\begin{align} | \begin{align} | ||
Line 24: | Line 26: | ||
\end{align} | \end{align} | ||
</math> | </math> | ||
In almost all non-[[ferromagnetic]] media, the magnetization '''M''' is linear in '''H''', | In almost all non-[[ferromagnetic]] media, the magnetization '''M''' is linear in '''H''', | ||
Line 31: | Line 32: | ||
M_\alpha = \sum_{\beta = x,y,z} \chi_{\alpha\beta} H_\beta. | M_\alpha = \sum_{\beta = x,y,z} \chi_{\alpha\beta} H_\beta. | ||
</math> | </math> | ||
For a magnetically ''isotropic'' medium the ''[[magnetic susceptibility]] tensor'' '''χ''' is a constant times the identity 3×3 matrix, '''χ''' = χ<sub>m</sub> '''1'''. For an isotropic medium | For a magnetically ''isotropic'' medium the ''[[magnetic susceptibility]] tensor'' '''χ''' is a constant times the identity 3×3 matrix, '''χ''' = χ<sub>m</sub> '''1'''. For an isotropic medium the relation between '''B''' and '''H''' is in SI and Gaussian units, respectively, | ||
:<math> | :<math> | ||
\begin{align} | \begin{align} | ||
Line 38: | Line 39: | ||
\end{align} | \end{align} | ||
</math> | </math> | ||
The material constant μ, which expresses the "ease" of magnetization of the medium, is | The material constant μ, which expresses the "ease" of magnetization of the medium, is the [[magnetic permeability]] of the medium. In most non-ferromagnetic materials χ<sub>m</sub> << 1 and consequently '''B''' ≈ μ<sub>0</sub>'''H''' (SI) or '''B''' ≈ '''H''' (Gaussian). For [[ferromagnetism|ferromagnetic]] materials the magnetic permeability can be sizeable (χ<sub>m</sub> >> 1). | ||
The two macroscopic [[Maxwell equation]]s that contain charges and currents, are equations for '''H''' and electric displacement '''D'''. This is a consequence of the fact that current densities '''J''' and electric fields '''E''' (due to charges) are modified by the magnetization '''M''' and the polarization '''P''' of the medium. In SI units the Maxwell equation for the magnetic field is: | |||
:<math> | |||
\boldsymbol{\nabla} \times \mathbf{H} = \mathbf{J} + \frac{\partial \mathbf{D}}{\partial t}. | |||
</math> | |||
The microscopic (no medium) form of this equation is obtained by eliminating '''D''' and '''H''' via | |||
'''D''' = ε<sub>0</sub>'''E''' and '''H''' = '''B'''/μ<sub>0</sub> ('''P''' = 0 and '''M''' = 0). | |||
The two Maxwell equations that do not contain currents and charges give relations between '''E''' and '''B''', instead of between '''H''' and '''D'''. For instance, [[Faraday's law (electromagnetism)|Faraday's induction law]] in SI units is, | |||
:<math> | |||
\boldsymbol{\nabla} \times \mathbf{E} + \frac{\partial \mathbf{B}}{\partial t} = 0. | |||
</math> | |||
This equation is valid microscopically (vacuum) as well as macroscopically (in presence of a ponderable medium). |
Revision as of 03:52, 28 May 2008
In physics, and more in particular in the theory of electromagnetism, magnetic induction is commonly denoted by B and is also known as magnetic flux density; it is very closely related to the magnetic field H and often identified with it.
The SI unit measuring the strength of B is T (tesla), and the Gaussian unit of B is gauss. One tesla is 10 000 gauss.
To give an indication of magnitudes: the magnetic field (or better magnetic induction) of the Earth is about 0.5 gauss = 50 μT. A medical MRI diagnostic machine typically supports a field of up to 2 T. The strongest magnets in laboratories are currently about 30 T (300 kG).
Note on nomenclature
Most textbooks on electricity and magnetism distinguish the magnetic field H from the magnetic induction B (both quantities are vector fields). Yet, in practice physicists and chemists almost always call B the magnetic field. It is likely that this is because the term "induction" suggests an induced magnetic moment. Because such a moment is usually not present, the term induction is confusing. In science, phrases are common as: "This EPR spectrum was measured at a magnetic field of 3400 gauss", and "Our magnet can achieve magnetic fields as high as 20 tesla". That is, most scientists use the term "field" with units tesla or gauss, while strictly speaking, gauss and tesla are units of the magnetic induction B.
Relation between B and H
In vacuum (also known as the microscopic case), in the absence of a ponderable medium, the fields B and H are related as follows,
where μ0 is the magnetic constant (equal to 4π⋅10−7 N/A2). Note that in Gaussian units the dimensions of H (Oer) and of B (G = gauss) are equal, 1 Oer = 1 G.
In the presence of a continuous magnetizable medium (the macroscopic case), the relation between B and H contains the magnetization M of the medium,
In almost all non-ferromagnetic media, the magnetization M is linear in H,
For a magnetically isotropic medium the magnetic susceptibility tensor χ is a constant times the identity 3×3 matrix, χ = χm 1. For an isotropic medium the relation between B and H is in SI and Gaussian units, respectively,
The material constant μ, which expresses the "ease" of magnetization of the medium, is the magnetic permeability of the medium. In most non-ferromagnetic materials χm << 1 and consequently B ≈ μ0H (SI) or B ≈ H (Gaussian). For ferromagnetic materials the magnetic permeability can be sizeable (χm >> 1).
The two macroscopic Maxwell equations that contain charges and currents, are equations for H and electric displacement D. This is a consequence of the fact that current densities J and electric fields E (due to charges) are modified by the magnetization M and the polarization P of the medium. In SI units the Maxwell equation for the magnetic field is:
The microscopic (no medium) form of this equation is obtained by eliminating D and H via D = ε0E and H = B/μ0 (P = 0 and M = 0).
The two Maxwell equations that do not contain currents and charges give relations between E and B, instead of between H and D. For instance, Faraday's induction law in SI units is,
This equation is valid microscopically (vacuum) as well as macroscopically (in presence of a ponderable medium).